Features
・InGaAs Sensor
・Wavelength Range: 400 nm - 1100 nm
・Power Range: -60 dBm to 16 dBm (1 nW - 40 mW)
・Interchangeable Fiber Connector, FC Adapter Included
・Absolute and Relative Measurements Displayed in W, dBm, dB
・NIST-Traceable Wavelength Calibration in 5 nm Steps
・50 Hours of Operation Between Charges
The PM20A Fiber Optic Power Meter is a robust, full-featured, handheld instrument, which together covers the full range of
optical fiber applications within the 400 - 1100 nm range with optical powers ranging from -60 dBm to +16 dBm
(1 nW - 40 mW). A rugged enclosure, internal sensor, and kickstand make this model ideal for field or lab applications.
Efficient, low-power circuitry provides long battery operation. The alphanumeric 8-digit LCD display allows easy power read-outs.
The operation of the device is intuitive due to the clearly labeled key pad. All common features like wavelength setting,
relative measurements, power read-out, and auto-shutdown are included. The PM20A is powered by a built-in rechargeable
NiMH battery or by the included AC adapter that also recharges the battery. The unit comes with an FC fiber adapter.
Specifications
・Sensor
・Optical Power Range: -60 dBm to 16 dBm (1 nW - 40 mW)
・Spectral Range: 400 - 1100 nm
・Detector Type: Silicon
・Sensor Size: 3.6 mm2
・Input Aperture: 3.6 mm2
・Aperture Thread: SM05 Thread (0.535"-40) for Fiber Adapters Fiber Adapter included for FC/PC and FC/APC
・Measurement Uncertainty: ±5%
・Measurement Standard: NIST Traceable
・Optical Damage Threshold: 50 W/cm2
・General
・Display Type: Alphanumeric 8-Digits LCD
・Display Format: 4 Digit Read Out with Units and Symbols
・Resolution: 14 bit
・Sample Rate: 10 Hz
・Dimensions (H x W x D) w/Holster: 125 x 80 x 39 mm (4.9" x 3.1" x 1.5")
・Weight: 0.2 kg (0.44 lbs)
・Operating Temperature: 5 °C to 40 °C
・Storage Temperature: -20 °C to 70 °C
・InGaAs Sensor
・Wavelength Range: 400 nm - 1100 nm
・Power Range: -60 dBm to 16 dBm (1 nW - 40 mW)
・Interchangeable Fiber Connector, FC Adapter Included
・Absolute and Relative Measurements Displayed in W, dBm, dB
・NIST-Traceable Wavelength Calibration in 5 nm Steps
・50 Hours of Operation Between Charges
The PM20A Fiber Optic Power Meter is a robust, full-featured, handheld instrument, which together covers the full range of
optical fiber applications within the 400 - 1100 nm range with optical powers ranging from -60 dBm to +16 dBm
(1 nW - 40 mW). A rugged enclosure, internal sensor, and kickstand make this model ideal for field or lab applications.
Efficient, low-power circuitry provides long battery operation. The alphanumeric 8-digit LCD display allows easy power read-outs.
The operation of the device is intuitive due to the clearly labeled key pad. All common features like wavelength setting,
relative measurements, power read-out, and auto-shutdown are included. The PM20A is powered by a built-in rechargeable
NiMH battery or by the included AC adapter that also recharges the battery. The unit comes with an FC fiber adapter.
Specifications
・Sensor
・Optical Power Range: -60 dBm to 16 dBm (1 nW - 40 mW)
・Spectral Range: 400 - 1100 nm
・Detector Type: Silicon
・Sensor Size: 3.6 mm2
・Input Aperture: 3.6 mm2
・Aperture Thread: SM05 Thread (0.535"-40) for Fiber Adapters Fiber Adapter included for FC/PC and FC/APC
・Measurement Uncertainty: ±5%
・Measurement Standard: NIST Traceable
・Optical Damage Threshold: 50 W/cm2
・General
・Display Type: Alphanumeric 8-Digits LCD
・Display Format: 4 Digit Read Out with Units and Symbols
・Resolution: 14 bit
・Sample Rate: 10 Hz
・Dimensions (H x W x D) w/Holster: 125 x 80 x 39 mm (4.9" x 3.1" x 1.5")
・Weight: 0.2 kg (0.44 lbs)
・Operating Temperature: 5 °C to 40 °C
・Storage Temperature: -20 °C to 70 °C