The BP1M2-50 M2 Analysis Extension Set allows automated, motorized, computer controlled M2 analysis with
our BP100 Series (sold separately). The Extension Set comprises the motorized translation stage, plus mounting accessories
to mount a BP100 Beam Profiler onto the stage and the stage onto a breadboard. The stage is configured for 50mm travel length
and is controlled by the M2 software module of the BP100 Series Beam Profiler via RS232. No additional driver is required.
Specifications
・Translation Stage: VT-80 + Pollux Controller
・Controller Interface: RS232, Convertible to USB
・Translation Range: 50 mm
・Optical Axis Height: 90 mm
・Wavelength Range: 200-1800nm, According to Beam Profiler Range, Extension Around Nominal Range Allowed
・M2 Measurement Range: 1.0 - No Upper Limit
・Typical M2 and k Accuracy: ± 5%, Depending on Optics and Alignment
・ccepted Beam Diameter for 5% Accuracy:
・BP104: 20 µm to 2 mm
・BP109: 20 µm to 4.5 mm
・Minimum Detectable Divergence Angle: < 0.1 mrad
・Applicable Light Sources: CW and Pulsed Sources =300 kHz
・Typical Measurement Time: 20-40 Seconds Depending on Beam Shape and Settings
