- Operating Wavelength Range: 400-550 nm
- Low Back Reflections (High Return Loss): 60 dB (Typ.)
- Each Cable is Individually Tested
- Ø3 mm Outer Jacket
- 1 Meter Long
This FC/APC, 1 m long, patch cable is ideal for systems that are sensitive to back reflections. The narrow key connector utilizes a ferrule that has an 8° angle polished tip, ensuring return losses in excess of 60 dB. Each cable is FC/APC connectorized on both ends.
Mating sleeves are available to connect FC to FC, SMA to SMA, and FC to SMA connectors. These mating sleeves minimize back reflections and ensure proper alignment of the cores of each connectorized fiber end.
Specifications- Fiber Type: S405-HP
- Operating Wavelength: 400 - 550 nm
- Cutoff Wavelength: 370 ± 20 nm
- Mode Field Diameter (MFD): 2.9 µm @ 405 nm, 3.2 µm @ 460 nm
- Cladding Diameter: 125 ± 1 µm
- Coating Diameter: 245 ± 15 µm
- Attenuation (Max): =30 dB/km @ 460 nm
- NA: 0.12
- Insertion Loss: <2.0 dB Loss (Connector to Connector) @ 633 nm
- Protective Jacketing: Ø3 mm, Yellow