- Ideal for use with our Fiber Collimation Packages to Minimize Fresnel Losses
- One AR-Coated FC/PC Connector Improves Return Loss
- One FC/PC Uncoated Connector
- Ravg < 0.5% for 1550 ± 100 nm
- Fiber: SMF-28e+
This AR-coated patch cable has a center wavelength of 1550 nm. The AR-coated, narrow key FC/PC connector (black boot) at the output side provides a reflectivity of <0.5% over the 1550 ± 100 nm range. The input side of the patch cable is supplied with a narrow key FC/PC connector (non-AR-coated). It cable is well-suited for use with our selection of fiber collimators. This cable also features a Ø3 mm Kevlar reinforced furcation tubing.
Note that the AR-coated end is meant for free-space applications (e.g., collimation) and will be damaged if it comes into contact with another connector tip. Mating two AR-coated connectors can increase back reflections causing a greater loss of transmission than when just using two uncoated connectors. For custom-coated patch cables, please contact Tech Support.
Specifications- AR Coating: Ravg < 0.5% for 1550 ± 100 nm
- Insertion Loss: 0.5 dB (Typical)
- Return Loss (Fiber to Fiber Uncoated Connector): 60 dB (Typical)
- Length: 1 m +7.5 cm / -0 cm
- Fiber Type: SMF-28e+
- Mode Field Diameter: 10.4 ± 0.5 µm @ 1550 nm
- Cladding Diameter: 125 ± 0.7 µm
- Coating Diameter: 245 ± 5 µm
- Max Attenuation: 0.20 dB/km @ 1550 nm
- NA: 0.14
- Protective Tubing: Ø3 mm Kevlar (FT030-Y)